The 'Time-of-day' standby parmeters change standby states in the connected cooler based around time of day and store operating hours.
When not an SCS Controller is not configured for 'time-of-day' standby, the standby settings are controlled by activities such as door openings and motion sensing.
Store opening hours and minutes
This is the local time (hour or minute) of day in a 24-hour system when the store opens.
For cold drink equipment, this means the equipment moves into Transition Mode 3 for the time set (pull-down time) before the in-store opening time (hour and minute) to make sure the cold drinks are close to serving temperature when the store opens.
Store Opening Hours - Monday to Sunday
| Digital display | Increments & units | Parameter range | Default |
| ohx^ | 1 hour | 0 to 23 hours | 7 hours |
Store Opening Minute – Monday to Sunday
| Digital display | Increments & units | Parameter range | Default |
| onx^ | 1 minute | 0 to 59 minutes | 0 minutes |
^x here represents day 1 to 7, so "on1" equals Monday.
Store closing hours and minutes
This is the hour when the store closes, Monday to Sunday. At this time, the cooler goes go directly into standby mode. Find out more about how standard SCS Controller modes work.
Store Closing Hour - Monday to Sunday
| Digital display | Increments & units | Parameter range | Default |
| Chx* | 1 hour | 0 to 23 hours | 17 hours |
Store Closing Minute - Monday to Sunday
| Digital display | Increments & units | Parameter range | Default |
| Cnx* | 1 minute | 0 to 59 minutes | 0 minutes |
*x here represents day 1 to 7, so "Ch1" equals Monday.