Definitions for the cooler statistics section within Field app

Note: Cooler statistics are normally logged in 30‑minute blocks, so the values shown in this screen reflect the average for each 30min time period.

Return air temperature: The internal air temperature inside the cooler (the “return air” sensor near the evaporator intake)
Return air temp minimum: The lowest return‑air temperature seen in the interval you’re viewing.
Return air temp maximum: The highest return‑air temperature seen in the interval you’re viewing.
Average power consumption: The cooler’s average electrical power across the whole interval, including on and off periods (for example, if the compressor runs ~50% of the time, the average will be roughly half of the continuous running power).
Door openings: The number of door‑open events detected by the door switch within the logging interval.
Sensorless door openings: The number of door‑open events detected by the controller’s internal “sensorless” algorithm (used where a physical door switch isn’t fitted or as a backup).
Temperature 2 average: The average value of “Temp 2,” which is the AD2 channel typically used for condenser temperature, over the interval.
Temperature 2 maximum: The highest Temp 2 (condenser) reading observed in the interval.
Voltage minimum: The lowest supply voltage measured by the controller during the interval.
Voltage maximum: The highest supply voltage measured by the controller during the interval.

When you look at the Statistics view within Field app, you will be able to compare trends over time for the following values.