IoT hardware operation & behavior
Cellular & Bluetooth connectivity
- Improving cellular connectivity for your AoFrio devices
- Troubleshooting cellular connectivity for IoT devices
- Troubleshooting connection issues for the SCS Controller
- About cellular connectivity for AoFrio devices
- Where to start? Verifying data flow from your assets to the cloud
- Where to start? Maintaining a good cellular connection
Optimize cooler performance & energy use
- About 'AoFrio INSIDE'
- Infographic: How the SCS Controller can save power when the outlet is closed for several days
- Optimize your cooler's power use with Standby Modes for timers and counters
- Optimize your cooler's power use with Standby Modes for lighting
- Optimize your cooler's power use with Standby Modes for temperature
- Infographic: How the SCS Controller can be programmed to save power overnight
- When to adjust defrost settings
- When to adjust temperature setpoints
- When to adjust alarm thresholds
- Diagnose cooler issues by comparing statistics with Field app
- Definitions for the cooler statistics section within Field app
SCS Controller
SCS Controller - Parameters
- Edit parameter files using Field app
- Normal Mode parameters for the SCS Controller
- Transition Mode parameters for the SCS Controller
- Standby Mode parameters for the SCS Controller
- Defrost Mode parameters for the SCS Controller
- Supply parameters for the SCS Controller
- Display parameters for the SCS Controller
- Compressor parameters in the SCS Controller
- Door switch parameters in the SCS Controller
- Hardware Inputs for the SCS Controller
- Hardware Outputs for the SCS 500 & 600 Controller
- Time-of-day standby parameters for the SCS Controller
SCS Controller - Faults & Alarms
- Alarm logic for coolers with installed SCS Controllers
- Edit alarm settings using Field app
- Adding external alarms to an SCS Controller
- Fault logic for cooler doors
- dor - How the 'Door Open' alarm works
- How the 'Excessive Door Open' alarm works
- How the 'Over voltage' alarm works
- How the 'Under voltage' alarm works
- ALr 14 - How the 'Condenser over temp' alarm works
- ALr 15 - How the 'Excessive Condenser Overtemp' alarm works
- ALr 17 - How the 'NTC Failure' alarm works
- ALr 19 - How the 'Terminal Alarm' works
- ALr 20 - How the 'Return Air Under Temperature' alarm works
- ALr 21 - How the 'Max Compressor Starts' alarm works
- ALr 38 – How the 'Run – Lockout Time' alarm works
- ALr 39 – How the 'Grace Time – Lockout Time' alarm works
- ALr 48 - Manual shutdown (long touch disable)