How to interpret the LED flashes displayed on the Monitor.
Each Monitor features a single LED indicator. Depending on the operating mode, the LED flashes in sequence with the following meanings:
|
Operating mode |
Configuration State |
LED Pattern |
Meaning |
|
Normal mode |
Fully configured |
One flash every 10 seconds (rate configurable) |
Monitor is advertising Bluetooth at high frequency and fully configured but does not have an active Bluetooth connection. |
|
Normal mode |
Incomplete configuration |
Two 5ms flashes every 10 seconds (rate configurable) |
Monitor is advertising Bluetooth at high frequency but requiring user to complete configuration. No active Bluetooth connection. |
|
Low power mode |
Fully configured |
One 5ms flash every 20 seconds (rate configurable) |
Monitor is advertising Bluetooth at reduced frequency and fully configured but does not have an active Bluetooth connection. |
|
Low power mode |
Incomplete configuration |
Two 5ms flash every 20 seconds (rate configurable) |
The Monitor is advertising Bluetooth at reduced frequency but with incomplete configuration (missing owner ID). |
|
Minimum power mode |
Fully configured |
One 5ms flash every 30 seconds (rate configurable) |
The Monitor is advertising for asset tracking at reduced frequency and fully configured but does not have an active Bluetooth connection. |
|
Minimum power mode |
Incomplete configuration |
Two 5ms flash every 30 seconds (rate configurable) |
The Monitor is only advertising for asset tracking at reduced frequency and has incomplete configuration (missing owner ID). No active Bluetooth connection. |
|
Active Bluetooth Connection |
Any |
One x 5ms flash every 2 seconds. This is overridden by critical battery mode. |
Indicates the Monitor has an active Bluetooth connection with a device. |
|
Entering Flight mode |
Not applicable |
10 5ms flashes at 200ms intervals on Bluetooth disconnect. |
Indicates the Monitor is entering its deactivated state, as set through the Connect Field app. It also shows the Monitor is entering flight mode and Bluetooth is deactivated. |
|
Flight mode |
Not applicable |
No flashing |
Indicates that Connect Monitor is in its lowest power state. This also means that Bluetooth is turned off and the Monitor cannot be found by scanning for coolers. It will need to be activated via NFC. |
|
Low battery mode |
Any |
No flashing |
Support battery saving until the Monitor can be replaced. |