Normal Mode parameters for the SCS Controller

When running in Normal Mode, the SCS controller primarily operates to maintain the Set Point Temperature.
Find out how to Edit parameter files using Field app

Temperature

Evaporator Fan

Parameter name	Digital display	Increments & units	Range	Default
Evaporator Fan On Time - Normal Mode	Fot	1 min	0 to 30 mins	2 mins
Evaporator Fan Off Time - Normal Mode	FoF	1 min	0 to 30 mins	2 mins

Time

Parameter name	Digital display	Increments & units	Range	Default
Inactivity Wait Time - Normal Mode	Ytn	0.5 hours	0.5 to 24 hours or InFinite	2 hours

Alarms

Parameter name	Digital display	Increments & units	Range	Default
High Temperature Alarm Setpoint*	htA	0.1 °C	-10.0 to 15.0	dISabled
Low Temperature Alarm Setpoint*	LtA	0.1 °C	-5.0 to 20.0	dISabled

Operational settings

Lighting & Display

Parameter name	Digital display	Increments & units	Range	Default
Display value during Normal Mode**	-	dlS	intergers	0 to 3
Light State Normal Mode - Channel A	LnA	1 %	0 to 100	100 %
Light State Normal Mode - Channel B	LnB	1 %	0 to 100	100 %
Light State Normal Mode - Channel C	LnC	1 %	0 to 100	100 %
Light State Normal Mode - Channel D	LnD	1 %	0 to 100	100 %
Light State Normal Mode - Channel E	LnE	integers	0 to 1	1

Temperature Alarm Setpoint

Parameter name	Digital display	Increments & units	Range	Default
High Temperature Alarm Setpoint	htA	0.1 °C	-35.0 to 25.0 or disabled	disabled
Low Temperature Alarm Setpoint	LtA	0.1 °C	-40.0 to 20.0 or disabled	disabled
Temperature Out-Of-Spec Alarm Delay	-	1 min	1 to 240	30 mins

Logging

The Logging Parameters define how data is logged and sent to the Cloud.

Parameter name	Digital display	Increments & units	Range	Default
Logging interval	LGt	mins	30 to 1440	30

*Options 1 & 2 are not functioning

** Not yet implemented

A summary of 'Normal Mode' parameters for the SCS Controller including the digital display codes, increments, logging (to the Cloud) and default settings.