IoT hardware operation & behavior
SCS Controller
- When to adjust temperature setpoints
- Cancel defrost on a cooler with an installed SCS 500/600 Controller
- Standard operation for the SCS 600 Controller
- How standard SCS Controller modes work
- When to adjust defrost settings
- Update settings manually on your SCS 600 Controller
- Lower the temperature on a SCS 500/600 Controller
- Reset the ID for an SCS Controller
- Frequency-based speed controls for Variable Speed Compressors
- Disable a cooler with Field App
- Timed disabling for untracked equipment
SCS Controller - Parameters
- Edit parameter files using Field app
- Normal Mode parameters for the SCS Controller
- Transition Mode parameters for the SCS Controller
- Standby Mode parameters for the SCS Controller
- Defrost Mode parameters for the SCS Controller
- Supply parameters for the SCS Controller
- Display parameters for the SCS Controller
- Compressor parameters in the SCS Controller
- Door switch parameters in the SCS Controller
- Hardware Inputs for the SCS 500 & 600 Controller
- Hardware Outputs for the SCS 500 & 600 Controller
- Time-of-day standby parameters for the SCS Controller
SCS Controller - Faults & Alarms
- Alarm logic for coolers with installed SCS Controllers
- Edit alarm settings using Field app
- Adding external alarms to an SCS Controller
- When to adjust alarm thresholds
- Fault logic for cooler doors
- dor - How the 'Door Open' alarm works
- How the 'Excessive Door Open' alarm works
- How the 'Over voltage' alarm works
- How the 'Under voltage' alarm works
- ALr 14 - How the 'Condenser over temp' alarm works
- ALr 15 - How the 'Excessive Condenser Overtemp' alarm works
- ALr 17 - How the 'NTC Failure' alarm works
- ALr 19 - How the 'Terminal Alarm' works
- ALr 20 - How the 'Return Air Under Temperature' alarm works
- ALr 21 - How the 'Max Compressor Starts' alarm works
- ALr 38 – How the 'Run – Lockout Time' alarm works
- ALr 39 – How the 'Grace Time – Lockout Time' alarm works